New Entrant – 360 Operator

ISO Certificates

New Entrant – 360 Operator

New Entrant – 360 Operator

The aim of this 3 day programme is to raise the standard of health and safety awareness by giving our ourse participants the knowledge, skills and attitude to enable them to operate the machine safely. This course will also help participants to comply with statutory requirements as outlined by SOLAS. on the machine – on completion of this training, the candidate will be issued with a provisional CSCS card.

This then allows the candidate to work, under supervision, and must log 200 hours work on the machine in a minimum of 6 months and maximum of 2 years. On completion of this work experience, the candidate must present themselves for a full test (1 day) before a full CSCS card will be issued.

 

Attendee Requirements

All trainees must be minimum 18 years of age and have 3 months general on site experience and require the following,

  • One Passport Photograph
  • PPS Number
  • Safe Pass completed in date
  • PPE (personal protective equipment) i.e., Hard Hat, High Vis Vest, Steel Toe Capped Boots, Gloves, Facemask

All the above requirements are required on the day of the course and must be physically with you in person.

As this course is conducted through English any specific needs/requirements should be identified at time of booking.

Otherwise an approved SOLAS interpreter would need to be provided on-site for the duration of the training course.

The interpreter would need to be approved in advance of the course and be capable of translating any technical words associated with the programme. None-English-speaking learners are not permitted on the course.

Once you receive your SOLAS New Entrant candidate pack it must be returned to us 72 hours in advance of the booking taking place.

NOTE: SOLAS rules state that they require 7 days’ notice from us to run a specific CSCS course.

Who Should Attend

This is a three day introduction for beginners to learn the basic operations of the 360 Excavator.

Course Modules

Day 1 Theory:
– Site Induction
– Review safe operation of plant and machinery
– Introduction to the machine

Day 2 Practical
– Introduction to the machine
– Servicing and pre start checks
– Basic introduction to the controls
– Manoeuvring around the site
– Inclines and declines
– Basic operation of the machinery

Day 3 Practical
– Continued Basic operation of the machinery
– More advanced skills in the operation of the machinery
– 1 HOUR PRACTICAL ASSESSMENT FOR EACH CANDIDATE

Duration: 3 days

Participants: Up to 3 participants / 1 Instructor

Time: 8am-4.30pm

Assessment

1 Hour Practical Assessment for each candidate.

Accreditation

On successful completion of the 3 day course the candidate will receive a New Entrant (provisional) operators card and log book and will be eligible to gain supervised experience on site over the aforementioned period.

This programme will consist of 3 days training on the machine – on completion of this training, the candidate will be issued with a “Provisional CSCS Card and a logbook. This then allows the candidate to work, under supervision, and must log 200 hours work on the machine in a minimum of 6 months and maximum of 2 years. On completion of this work experience, the candidate must present themselves for a full test (1 day) before a full CSCS card will be issued.

€875pp

Available Courses

Date & Time Locations

All Courses

Free

Safe Pass

SOLAS APPROVED ORGANISATION FOR:

The aim of our Safe Pass Training Course is to ensure that all workers within the construction industry have the basic knowladge of health and safety, construction regulations, and are able to work on-site without been a risk to themselves or others where they might be affected by there acts or omissions.(HSA 2021). Minium 8 people required and a maximum of 20 to run this course.

Our location is ECS Safety & Training, Brownsbarn, Co. Dublin and is excessable by car only.

Read more
« ‹ › » page 1 / 16
Free

Safe Pass

SOLAS APPROVED ORGANISATION FOR:

The aim of our Safe Pass Training Course is to ensure that all workers within the construction industry have the basic knowladge of health and safety, construction regulations, and are able to work on-site without been a risk to themselves or others where they might be affected by there acts or omissions.(HSA 2021). Minium 8 people required and a maximum of 20 to run this course.

Our location is ECS Safety & Training, Brownsbarn, Co. Dublin and is excessable by car only.

Read more
Free

Manual Handling Practical

Our Manual Handling Training course is taken once you have passed your theory course with ECS Safety & Training online. We will run through a series of different practicals which you will use in your workplace. All you have to do is enroll on your free practical assessment choosing your required date and time.

Once this is completed you will be sent your Zoom login link via email with all details relating to your practical assesment online during office hours Monday-Friday 8am-5pm excluding bank holidays.

Read more
Free

CSCS Site Dumper Experienced Operator (Saturday)

SOLAS APPROVED ORGANISATION FOR:

The aim of our CSCS Site Dumper Training Course is to raise the standard of health and safety awareness by giving our ourse participants the knowledge, skills and attitude to enable them to operate the machine safely. This course will also help participants to comply with statutory requirements as outlined by SOLAS.

Read more
« ‹ › » page 1 / 6

Head Office
Office C, Level 1
Citywest Shopping Centre
Fortunes Walk, Saggart
Co. Dublin.
D24 Y752
Mobile (085) 854 6587

Training Centre
Brownsbarn,
Lower Commons Road,
Kingswood Cross,
Dublin 22.
D22 TK35
Mobile (085) 854 6587

QUICK ENQUIRY

Connect with us

Facebook-f
Instagram
Linkedin-in

SIGN UP FOR UPDATES

We won't spam you. We'll simply keep you up to date with any special offers and relevant industry news!

Company Registration Number : 652160

Registered Business Address: Office C, Citywest Shopping Centre, Fortunes Walk, Saggart, Dublin 24.

Head Office Address: Browns Barn, Citywest, Co. Dublin

Terms and Conditions | Privacy Policy

© ECS Safety Training. All rights reserved.

Site by Genie Media